Firmware Evercoss L557 100% OK

Download Firmware Evercoss L557 Yang Berbentuk Rar / Zip Kemudian Ekstrak Di PC ,Lalu Instal USB Driver Di PC Kemudian Buka dan Jalankan Flashtool.Firmware Evercoss L557 Ini Dapat Anda Gunakan Untuk Mengatasi Bootloop,Lupa Pola,Hank dll...

Sebelum Melakukan Flashing Evercoss L557 Ada Baiknya Anda Mengatahuinya Terlebih Dahulu,Bahwa Flashing Akan Menghapus Data Yang Ada Di Memori Internal Evercoss L557,Kami Merekomendasikan Backup Data Yang Menurut Anda Penting,Bachup Data Seperti : Kontak Foto,Video Dll....

Flashing Evercoss L557 Adalah Suatu Kegiatan Instal Ulang Dalam Upaya Mengembalikan Perangkat Ke Pengaturan Awal Pabrik Sekaligus Memperbaiki Kerusakan Pada System Software Seperti Bootloop,Hank Blank , Matot dll...
Firmware Evercoss L557
Firmware Evercoss_L557_MT6737M_V01_10082017_7.0.zip

Cara Flash  Via Sp Flashtool:
  1. Download Firmware , Kemudian Ekstrak Di Komputer / PC Anda
  2. Selanjutnya Instal Usb Driver
  3. Kemudian Buka Dan Jalankan Flashtool, Pada Tab Scatter Load Di Flashtool Klik Kemudian Masukkan Firmware MT65XX_Android_Scatter.txt Yang Berada Didalam Folder Hasil Ekstrak 
  4. Selanjutnya Klik Download Pada Flashtool,Pastikan Semua Tercentang ,Kecuali Preloader Sebaiknya Jangan Dicentan,Kecuali Anda Mempunyai Backup Firmware Yang Original Dari Ponsel Anda
  5. Kemudian Siapkan Ponsel Dalam Kondisi OFF
  6. Selanjutnya Dalam Kondisi Off Hubungkan Ponsel Ke PC / Komputer Menggunakan Kabel Usb,Pastikan Driver Sudah Terinstal Di Komputer Agar  Devices Terdeteksi Oleh Flashtool
  7. Proses Flashing / Instal Ulang Sedang Berlangsung,Tunggu Hingga Proses Instal Ulang / Flashing Selesai
  8. Jika Sudah Selesai Maka Akan Muncul Notifikasi Download OK Pada Flashtool Dalam Kotak Berwarna Hijau
  9. Cabut Ponsel Anda,Kemudian Coba Nyalakan,Untuk Booting Awal Biasanya Agak Lama Karena Baru Di Flash / Instal Ulang Jadi Wajar,Tunggu Saja Hingga Booting Selesai.
Selengkapnya Cara Flashing Via Sp Flashtool Lengkap Dengan Gambar
Read More

Firmware Alcatel U3A 10 Wifi Tested

Download Firmware Alcatel U3A 10 Wifi Shaped Rar / Zip Then Extract In PC, Then Install USB Driver Alcatel U3A 10 Wifi In PC Then Open and Run Flashtool.Firmware Alcatel U3A 10 Wifi This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware Alcatel U3A 10 Wifi

File Name : Alcatel_U3A_10_Wifi_MT6580_20180203_8.1.0.zip
Size           : 510.41 MB



How to Flash Alcatel U3A 10 Wifi Via Sp Flashtool: 
  • Download Firmware Alcatel U3A 10 Wifi, Then Extract On Your Computer / PC Next Install Usb Driver 
  • Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  • Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Mobile Phone 
  • Then Prepare the Phone In OFF Condition 
  • Next In Off Condition Connect Phone To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  • Wait Until Process Reinstall / Flashing Completed 
  • If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  • Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.
Read More

Firmware Alcatel 3X-5058T Tested Free 100% Work

Download Firmware Alcatel 3X-5058T Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool.Firmware This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware Alcatel 3X-5058T

File Name : Alcatel_3X_5058T_MT6739_20171222_7.1.1.zip
Size           : 2 GB



How to Flash Alcatel 3X-5058T Via Sp Flashtool: 
  1. Download Firmware, Then Extract On Your Computer / PC, Next Install Usb Driver Alcatel 3X-5058T
  2. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  3. Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Alcatel 3X-5058T
  4. Then Prepare the Phone In OFF Condition 
  5. Next In Off Condition Connect Phone To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Alcatel 3X-5058T Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  6. Wait Until Process Reinstall / Flashing Completed 
  7. If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  8. Unplug Your Alcatel 3X-5058T, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.
Read More

Firmware Winmax Polar H5 MT6580 Free

Download Firmware Winmax Polar H5 MT6580 Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool.Firmware Winmax Polar H5 MT6580 This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware Winmax Polar H5

File Name : Winmax_Polar_H5_MT6580_13062016.zip
Size           : 714.03 MB



How to Flash Winmax Polar H5 Via Sp Flashtool: 
  1. Download Firmware, Then Extract On Your Computer / PC Next Install Usb Driver 
  2. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  3. Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Mobile Phone 
  4. Then Prepare the Phone In OFF Condition 
  5. Next In Off Condition Connect Phone To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  6. Wait Until Process Reinstall / Flashing Completed 
  7. If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  8. Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.
Read More

Firmware Huawei Y321-U051 Free Tested

Download Firmware Huawei Y321-U051 Shaped Rar / Zip Then Extract In PC, Then Install USB Driver Huawei Y321-U051 In PC Then Open and Run Flashtool.Firmware This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware Huawei Y321-U051
File Name: Huawei_Y321-U051_MT6572_V100R001C332B400_4.2.2.zip
Size : 411.91 MB



How to Flash Huawei Y321-U051 Via Sp Flashtool: 
  • Download Firmware Huawei Y321-U051, Then Extract On Your Computer / PC Next Install Usb Driver 
  • Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  • Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Mobile Phone 
  • Then Prepare the Phone In OFF Condition 
  • Next In Off Condition Connect Huawei Y321-U051 To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Huawei Y321-U051 Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  • Wait Until Process Reinstall / Flashing Completed 
  • If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  • Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.

Collection of Firmware
Read More