Firmware ZTE U819 Stock ROM

Download Firmware ZTE U819 Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool. Firmware ZTE U819 This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware ZTE U819 Stock ROM

How to Install Firmware ZTE U819: 
  1. Download Firmware ZTE U819, Then Extract On Your Computer / PC Next Install USB Driver 
  2. Then Open And Run Flash tool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  3. Next Click Download In Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have The Original Firmware Backup From Your Mobile Phone 
  4. Then Prepare the ZTE U819 In OFF Condition 
  5. Next In Off Condition Connect Phone To PC / Computer Using USB Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  6. Wait Until Process Reinstall / Flashing Completed 
  7. If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  8. Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.

0 Response to "Firmware ZTE U819 Stock ROM"

Post a Comment