Firmware Huawei P10 Plus MT6572 V.04

Download Firmware Huawei P10 Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool. Huawei P10 Firmware This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware Huawei P10 Plus MT6572 V.04

File Name : Huawei_P10_Plus_MT6572_MT6572_V04_05272017_4.4.2.zip
Size           : 214 MB



How to Flash Huawei P10 Via Sp Flashtool: 
  1. Download Firmware Huawei P10, Then Extract On Your Computer / PC Next Install USB Driver Huawei P10
  2. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  3. Next Click Download In Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have The Original Firmware Backup From Your Huawei P10
  4. Then Prepare the Huawei P10 In OFF Condition 
  5. Next In Off Condition Connect Huawei P10 To PC / Computer Using USB Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  6. Wait Until Process Reinstall / Flashing Completed 
  7. If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  8. Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.

Subscribe to receive free email updates:

0 Response to "Firmware Huawei P10 Plus MT6572 V.04"

Post a Comment