Firmware Huawei Ascend Y360-U23 Free 100% Tested
Download Firmware Huawei Ascend Y360-U23 Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool. Huawei Ascend Y360-U23 Firmware This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
File Name: Huawei_Ascend_Y360-u23_MT6582_20180516_4.2.zip
Size : 739.36 MB
How to Flash Huawei Ascend Y360-U23 Use Flashtool:
File Name: Huawei_Ascend_Y360-u23_MT6582_20180516_4.2.zip
Size : 739.36 MB
How to Flash Huawei Ascend Y360-U23 Use Flashtool:
- Download Firmware Huawei Ascend Y360-U23, Then Extract On Your Computer / PC Next Install USB Driver Huawei Ascend Y360-U23
- Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract
- Next Click Download In Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have The Original Firmware Backup From Your Huawei Ascend Y360-U23
- Then Prepare the Phone In OFF Condition
- Next In Off Condition Connect Phone To PC / Computer Using USB Cable, Make Sure Driver Is Installed In Computer To Huawei Ascend Y360-U23 Detected By Flashtool Flashing Process / Re-Install Ongoing,
- Wait Until Process Reinstall / Flashing Completed
- If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box
- Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.
0 Response to "Firmware Huawei Ascend Y360-U23 Free 100% Tested"
Post a Comment