Firmware Alcatel U3A 10 Wifi Tested

Download Firmware Alcatel U3A 10 Wifi Shaped Rar / Zip Then Extract In PC, Then Install USB Driver Alcatel U3A 10 Wifi In PC Then Open and Run Flashtool.Firmware Alcatel U3A 10 Wifi This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Firmware Alcatel U3A 10 Wifi

File Name :
Size           : 510.41 MB

How to Flash Alcatel U3A 10 Wifi Via Sp Flashtool: 
  • Download Firmware Alcatel U3A 10 Wifi, Then Extract On Your Computer / PC Next Install Usb Driver 
  • Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  • Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Mobile Phone 
  • Then Prepare the Phone In OFF Condition 
  • Next In Off Condition Connect Phone To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  • Wait Until Process Reinstall / Flashing Completed 
  • If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  • Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.

0 Response to "Firmware Alcatel U3A 10 Wifi Tested"

Post a Comment