How To Flash Use SP Flash Tool

Are you using an Android smartphone or tablet? If yes are you searching for a simple way to flash stock or custom ROM on your device? If yes is your answer again, then you are in the right place. Here we have given a step by step tutorial to flash stock ROM firmware using SP Flash tool (Smart Phone Flash Tool).

Prerequisites :

      USB Cable
      Make sure you have stable USB cable without any damage. USB Cable will be used as coordination between PC and phone. USB cable makes phone easily detected from PC, erase and Transfer files between PC and phone. Using damaged or lost USB cable could make flashing process become harder and incomplete.
          MTK Drivers/ MT65XX VCOM Drivers or Universal one
          These Drivers make easy for SP Flash tool to upload/ delete and Overwrite Rom on flashing phone. No any activity could be easy or detected or done if you forget to download these Drivers and locate to SP Flash Tool.
              SP Flash Tools
              These are the main programs used to process all activity between a connection of Phone and Computer as well erase, upload, and Overwrites Stock Rom Firmware during Flashing. There are Two kinds of these Tolls,” “One which use Internet Connection and other which operate without Internet Connection”, but many likes to use the one which use the Internet connection. The tool on below steps use work with the internet connection.
                  Stock ROM Firmware
                  This is an operating system of all phones but it differs on specs depending version of a phone. It is important to Download Stock Rom with exact phone Brand, the version with all details. Using different Stock ROM may lead to a brick of your phone or fail to lunch or shows error screen after Flashing. Tecno phones may vary depending on country marketed as well brand, most important thing that you should examine before choosing tools.

                  Tutorial To Flash Stock ROM Firmware Using SP Flash Tool:
                  1. To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
                  2. Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
                  3. Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
                  4. Next, go to the extracted folder in Step 1 and click “Flashtool.exe” to launch the SP flash tool.
                  5. Next, in the download tab click on “Scatter-loading” button. Now click on “Open Scatter File MT65XX ” and choose the scatter file from Step 2.
                    How To Flash Use SP Flash Tool
                  6. Next, click on the “Download” button to launch the firmware flashing process.
                    How To Flash Use SP Flashtool
                  7. Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button
                  8. The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in SmartPhone Flash Tool... 
                    How To Flash MTK Devices Use SP Flashtool
                  9. Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.
                  That’s it. Now you have successfully flashed stock ROM firmware on your Android device using SP flash tool (Smart Phone Flash Tool). If you face any issues while following this flashing tutorial, do let me know via comments. while following this flashing tutorial, do let me know via comments.

                  0 Response to "How To Flash Use SP Flash Tool"

                  Post a Comment