Firmware File Stock ROM Panasonic Eluga Ray 500

Download Firmware Panasonic Eluga Ray 500 Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool.Firmware This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...
Stock ROM Panasonic Eluga Ray 500

Before Flashing It's Better You Knew It First, That Flashing Will Delete Existing Data In Internal Memory Of The Panasonic Eluga Ray 500, We Recommend Data Backup That You Know Important, Bachup Data Like: Contact Photos, Video Etc ....
  • Processor 1.25GHz quad-core
  • Processor make Mediatek MTK6737
  • RAM 3GB
  • Internal storage 32GB
  • Expandable storage Yes
  • Expandable storage type microSD
  • Expandable storage up to (GB) 128
SOFTWARE
  • Operating System Android 7.0
CONNECTIVITY
  • Wi-Fi: Yes
  • Wi-Fi standards supported: 802.11 b/g/n
  • GPS: Yes
  • Bluetooth: Yes, v 4.00
  • NFC: No
  • Infrared: No
  • USB OTG: No
  • Headphones: 3.5mm
  • FM: Yes
  • Number of SIMs: 2
  • SIM: 1
  • SIM Type: Nano-SIM
  • GSM/CDMA: GSM
  • 3G: Yes
  • 4G/ LTE: Yes
  • Supports 4G in India (Band 40): Yes
Flashing is an activity to reinstall in an attempt to restore the device to factory initial setup while fixing damage to system software such as Bootloop, Hank Blank, Matot etc ..
Firmware

File Name : Pansonic_Eluga_Ray_500_MT6737M_15082017.zip
Size           : 1.79 GB



How to Flash Panasonic Eluga Ray 500 Use Sp Flash tool: 
  1. Download Firmware Panasonic Eluga Ray 500, Then Extract On Your Computer / PC Next Install Usb Driver 
  2. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  3. Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Mobile Phone 
  4. Then Prepare the Phone In OFF Condition 
  5. Next In Off Condition Connect Phone To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  6. Wait Until Process Reinstall / Flashing Completed 
  7. If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  8. Unplug Your Phone, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.


Collection of Firmware

0 Response to "Firmware File Stock ROM Panasonic Eluga Ray 500"

Post a Comment